Features:

• Alloy Head, tough & durable
• Anti-dust cooling system
• Side switch for easy operation

General power tool safety warnings:

• Work area safety, keep it clean and well lit
• Keep children and bystanders away while operating a power tool
• Electrical safety
• Personal safety
• Power tool use and care
• Service

• SPECIFIC SAFETY RULES:

  • Always use proper guard with grinding wheel 
  • Accessories must be rated for at least the speed recommended on the tool warning label
  • Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring on its own cord
  • Keep guards in place 
  • Use only wheels having a maximum operating speed at least as high as "NO Load RPM" marked on the tool's nameplate.
  • Check the wheel carefully for cracks or damaged before operation
  • Use only flanges specified for this tool 
  • Be careful not to damage the spindle
  • Hold the tool firmly 
  • Keep hands away from rotating parts
  • Make sure the wheel is not contacting the workpiece before the switch is turned on
  • Before using the tool on an actual workpiece, let it run for a while
  • Use the specified surface of the wheel to perform the grinding
  • Watch out for flying sparks, hold the tool so that sparks fly away from you and other persons or flammable materials 
  • Do not leaves the tool running, Operate the tool only when hand-held
  • Do not touch the workpiece immediately after operation, it may be extremely hot and could burn your skin  

Specification:

• Max Disc Diameter: 100mm/115mm
• Rated input power: 900W
• No-Load speed: 11000r/min
• Rated frequency: 50/60Hz
• Rated voltage: 220-240V 
• WARRNING: FOR YOUR PERSONAL SAFETY, READ AND UNDERSTAND BEFORE USING AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE