For your safety:

• Secure the workpiece
• Do not work materials containing asbestos 
• Always wait until the tool has come to a complete stop before placing it down 
• Do not use a power tool with a damaged power cord, do not touch the damaged  power cord and pull the power plug when the cord is damaged while working
• Connect power tools that are used in the open via ground fault circuit interrupter
• Keep hands away from the cutting area
• Guide the tool against the workpiece only when it is switched on
• Pay attention that the footplate rests securely on the material while sawing
• After the cut, switch off the power tool and wait until the saw blade has come to a stop before pulling it out of the cut
• Use only undamaged blades that are in proper condition
• After switching off, do not "brake" the saw blade by applying sideward pressure against it
• Use appropriate detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance 
• 
  

Assembly:

• Installing or removing saw blade 
• Hex wrench storage
• Anti-splintering device (optional accessory)
• Bevel cutting
• Front flush cuts
• Cutouts
• Finishing edges
• Metal cutting
• Dust extraction
• Rip fence (optional accessory)
•  

  Specification:

  
  

  • Voltage: 220-240 V 
  • Rated input power: 500 W 
  • Frequency: 50Hz
  • no. 500-300/min
  • 50mm
• WARNING: FOR YOUR SAFETY, READ AND UNDERSTAND BEFORE USING AND SAVE THESE INSTRUCTION FOR FUTURE REFERENCE