General power tool safety warnings:

• Work area safety, keep it clean and well lit
• Keep children and bystanders away while operating a power tool
• Electrical safety
• Personal safety
• Power tool use and care
• Service
• Keep rags, clothes, wire, cord away on the work area
• Inspect carefully if there is nails, sand on worksurface before working, Avoid to meet nail when planning
• B e carefully when replacing blade
• Ensure the fixing bolt on blade holder has been securely tightened before operation 
• Hold tool firmly with both your hands during operation
• Don't touch rotating parts
• Prior to use, run tool for a while to get full speed
• Ensure that the cut off wheel untouched workpiece before carrying out work
• Start tool for a while to get full speed, then operate
• 200mm is need between tool and your body
• Never clean crumbs from blade set with your finger
• Do not leave a running tool unattended, Hold both your hands during operation
• Switch Off and place planner upside down, with the blade untouched, before you want to put down tool
• Replace blade and blade set cover timely to avoid unbalanced because of frequently using then to be vibration and shorten tool's life

Specification:

• Rated input power: 600W
• No-Load speed: 15000r/min
• Rated frequency: 50/60Hz
• Rated voltage: 220-240V 
• 
  
• WARRNING: FOR YOUR PERSONAL SAFETY, READ AND UNDERSTAND BEFORE USING AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE