General power tool safety warnings:

• Work area safety, keep it clean and well lit
• Keep children and bystanders away while operating a power tool
• Electrical safety
• Personal safety
• Power tool use and care
• Service
• Hold tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord
• Wear ear protectors when using the tool for extended periods
• Wear a hard hat, safety glasses and/or face shield 
• Be sure the bit is secured in place before operation 
• Under normal operation, the tool is designed to produce vibration, the screws can come loose easily, causing a breakdown or accident
• Always be sure you have a firm footing, be sure no one is blow when using the tool in high locations
• Hold the tool firmly with both hands 
• Keep hands away from moving parts
• Do not leave the tool running, operate the tool only when hand-held
• Do not point the tool at any one in the area when operating
• Do not touch the bit or parts close to the bit immediately after operation, they may be axtremely hot and could burn your skin

Specification:

• Max Drill Dia mm: 32
• Rated input power: 1450W
• No-Load speed: 800r/min
• Rated frequency: 50/60Hz
• Rated voltage: 220-240V 
• WARRNING: FOR YOUR PERSONAL SAFETY, READ AND UNDERSTAND BEFORE USING AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE